ISTECH, Incorporated
ISTECH, Incorporated
4691 Raycom Road / Dover, PA 17315 - Phone (800)555-4880

Sample Vision Application #2:

Vision Inspection Add-On for Level 2 Automation

Location : U.S.A.
Inspection Lines : 1
Part Size & Shape : .5 in. to 3 inch diameter
Number of Part Types : 15 per line
Materials Handling : X-Y Indexing Table (Pre-Existing)
Key Inspection Parameters : All elements present or absent, contact insertion depth, contact deformation

Description of Process:

Parts are automatically assembled and transferred to a walking beam track. When the part indexes to the camera stations, it is conveyed over a modified section of track which is necessary to back light the connector. The walking beam passes the part in front of the cameras and an image is snapped in half-inch increments of each variable length connector. The part is inspected while in motion in order to eliminate the need for accurate positioning. The inspection insures all components are present and gap measurements are correct. If the part is found to not be acceptable it is automatically removed from the track into a rejection bin. If the part is found to be acceptable, it is passed to Laser Marking and subsequent Packaging.

Configuration :

Vision Processor : Omron F200
Inspection Lines : 1
Cameras Per Line : 1
Inspection Time : 500 ms per snap (including acquisition and processing)

Top